Description
Free ground shipping.
See fitment guide below for all applications, special notes, and exact lowering amounts.
Are you looking for an affordable suspension kit?
Want to lower your car and replace high mileage, worn out shocks at the same time?
This Bilstein B12 lowering suspension kit is the solution.
It's the perfect combination of performance parts from 2 legendary brands.
Bilstein started with a set of their performance B8 dampers, then called on Eibach for some of their comfortable, progressive rate lowering springs.
The dampers and springs are engineered and matched per vehicle, with proper compression, rebound, and spring rates, for a perfect balance of performance and comfort.
Tasteful lowering of up to 40mm (1.6 inches) for an aggressive, noticeable drop in stance that is still daily driver friendly.
Experience much improved handling, response, and turn-in without the ride being harsh or bumpy.
These kits offer the most bang for your buck and are a great starting point for a budget minded suspension upgrade project.
The best suspension kits for BMW M3 at MGC.
*Images are sample only and may not be the exact kit for your vehicle.
Also available: BMW E36 M3 lowering springs by Eibach. The most affordable way to lower your car for the look you want.
Fitment Guide:
- 1996-1999 BMW M3 Base L6.3152cc
1996: Rear Lowered Height: 15mm, up to 1130kg Axle Load Front Lowered Height: 25mm, up to 920kg Axle Load Front Coil Spring Inside Diameter Must Be 106 mm Coil Spring Inside Dia. Must Be 116mm; Chassis Code E36; Supersedes PN[46-000781];w/0 in. Drop And Rear w/0 in. Drop 1997: Rear Lowered Height: 15mm, up to 1130kg Axle Load Front Lowered Height: 25mm, up to 920kg Axle Load Front Coil Spring Inside Diameter Must Be 106 mm Coil Spring Inside Dia. Must Be 116mm; Chassis Code E36; Supersedes PN[46-000781];w/0 in. Drop And Rear w/0 in. Drop 1998: Rear Lowered Height: 15mm, up to 1130kg Axle Load Front Lowered Height: 25mm, up to 920kg Axle Load Front Coil Spring Inside Diameter Must Be 106 mm Coil Spring Inside Dia. Must Be 116mm; Chassis Code E36; Supersedes PN[46-000781];w/0 in. Drop And Rear w/0 in. Drop 1999: Rear Lowered Height: 15mm, up to 1130kg Axle Load Front Lowered Height: 25mm, up to 920kg Axle Load Front Coil Spring Inside Diameter Must Be 106 mm Coil Spring Inside Dia. Must Be 116mm; Chassis Code E36; Supersedes PN[46-000781];w/0 in. Drop And Rear w/0 in. Drop